Adhesives at Work
Delta Adhesives are premium quality products manufactured to the highest quality standards from the finest materials available using state of the art technology.
They provide designers/engineers with rapid solutions to bonding, sealing, locking and joining problems. Adhesives improve performance by reducing production costs, speed up assembly lines and maintainence repairs.
Thread Locking-Anaerobic Adhesives
D66 Stud Grade
Use where disassembly is unlikely locks, studs, bolts, nuts, screws and pipe assemblies permanently. Ideal for use with worn threads.
Temp range -60°C to +150°C.
D77 Nut Grade
Use where disassembly is required. Locks nuts, bolts, screws and studs. Prevents fasteners working loose from vibration and shock.
Temp range -60°C to +150°C.
D44 Screw Grade
Low strength locking of fasteners, can be re-adjusted. Use on electronic assemblies, precision screws and instruments.
Temp range -60°C to +150°C.
D33 Penetrating Grade
Capillary action grade can be applied to assembled parts ie. threaded fasteners, close fitting parts, seals porous castings, instrument assembly. Can be disassembled.
Temp range -60°C to +150°C
Sealing-Anaerobic Adhesives
D333 Pipe Sealant Grade
Pipe sealant general purpose. Use on screwed threads, on pipework, pneumatic systems and air brake connections.
Temp range -60°C to +150°C.
D444 Multi Gasket
Eliminates need for pre-cut gaskets. Use on face to face joints, flanges, engine assembly, gear box and axle casings.
Temp range -60°C to +150°C.
D555 Flex Gasket
High performance gasket. Use on rigid and flexible assemblies. High pressure sealing on face to face joints flanges, engine covers, pump faces, motors, compressors etc.
Temp range -60°C to +180°C.
D888 Hydraulic Grade
Sealing of hydraulic connections, pneumatic fittings, ideal for sealing unions and olives on diesel fuel lines. Will not clog filters or valves.
Temp range -60°C to +150°C.
Retaining-Anaerobic Adhesives
D22 Bearing Grade
Retaining of bearings, cylindrical parts, bushes and oil seals that require disassembly. Parts can be dismantled with normal hand tools.
Temp range -60°C to +150°C.
D55 High Strength Retainer
For permanent retention of cylindrical parts where maximum retention is required, splines, bushes, keys, rotors to shafts, pulleys and sprockets. High viscosity, gap filler.
Temp range -60°C to +150°C.
D88 Retaining Grade - High Temp
High Temperature retaining grade permanent retention. Gears, pulleys, fans, couplings, oilite bushes, cams and rotors.
Temp range -60°C to +200°C.
Bonding-Cyanoacrylate Adhesives
CYNO 40
A fast curing low viscosity cyanoacrylate suitable for rubber, ceramics, plastics, metals,
"O" rings and UPVC.
Colour: Clear
Viscosity: Low
Gap FIll: 0.10mm
Shear: 30N/mm²
Set TIme: 2-30 secs
Equivalent: 406/495
CYNO 110
A fast curing medium viscosity cyanoacrylate suitable for rubber, EPDM, SBR, PVC,
metals and pottery. A general purpose cyanoacrylate.
Colour: Clear
Viscosity: Medium
Gap FIll: 0.10mm
Shear: 30N/mm²
Set TIme: 2-45 secs
Equivalent: 401
CYNO 1200
High viscosity cyanoacrylate use where vibration occurs, on uneven surfaces, metals, plastics, ferrite magnets, rubber and ceramics. High gap fill.
Colour: Clear
Viscosity: High
Gap FIll: 0.20mm
Shear: 30N/mm²
Set TIme: 5-60 secs
Equivalent: 415
CYNO 2000
Tough black cyanoacrylate use where high shock resistance and flexing is required. Use on rubber, plastics, metals, wire tacking, loud speakers and rubber to metal applications.
Colour: Black
Viscosity: High
Gap FIll: 0.30mm
Shear: 17N/mm²
Set TIme: 30-50 secs
Equivalent: 480
CYNO GEL
A thixotropic cyanoacrylate, will not sag or slump. Use on porous surfaces, vertical and overhead situations, fill large gaps, on metals, plastics, ceramics, leather, adhering signs and name plates.
Colour: Clear
Viscosity: Very High
Gap FIll: 0.50mm
Shear: 18N/mm²
Set TIme: 60-100 secs
Equivalent: 454
Sealants / Gasketing
D200
Colour: Clear
QTY: 310ml
Description: Delta silicone rubber sealants are one part moisure cure (R.T.V.). They are 100% silicone, will not shrink and remain flexible after cure, suitable for use on most substrates. Excellent weather resistance. Acetic acid fumes evolve during cure. Do not use on copper or lead.
Application: Ensure surfaces are clean before applying sealant, use as a gasket bonding agent on metals, plastics, glass, wood, concrete, plasterboard, acrylics, etc. A highly versatile product use in the engineering, marine, construction and automotive industries.
Temp: -60°C to +260°C
D201
Colour: White
QTY: 310ml
Description: Delta silicone rubber sealants are one part moisure cure (R.T.V.). They are 100% silicone, will not shrink and remain flexible after cure, suitable for use on most substrates. Excellent weather resistance. Acetic acid fumes evolve during cure. Do not use on copper or lead.
Application: Ensure surfaces are clean before applying sealant, use as a gasket bonding agent on metals, plastics, glass, wood, concrete, plasterboard, acrylics, etc. A highly versatile product use in the engineering, marine, construction and automotive industries.
Temp: -60°C to +260°C
D202
Colour: Black
QTY: 310ml
Description: Delta silicone rubber sealants are one part moisure cure (R.T.V.). They are 100% silicone, will not shrink and remain flexible after cure, suitable for use on most substrates. Excellent weather resistance. Acetic acid fumes evolve during cure. Do not use on copper or lead.
Application: Ensure surfaces are clean before applying sealant, use as a gasket bonding agent on metals, plastics, glass, wood, concrete, plasterboard, acrylics, etc. A highly versatile product use in the engineering, marine, construction and automotive industries.
Temp: -60°C to +260°C
D203
Colour: Clear
QTY: 85g
Description: DELTA instant gasket (RTV cure) A specially formulated premium silicone to replace pre-formed gaskets. It forms a flexible rubber seal and is resistant to oils, water and antifreeze. Not suitable for immersion in petrol.
Application: Ensure surfaces are clean, suitable for, engine casings, flanges, transmissions, used widely in engineering, marine and automotive industries.
Temp: -60°C to +260°C
D204
APPLICATION GUN FOR 310ml CARTRIDGES
D205
Colour: Black
QTY: 310ml
Description: DELTA Polyurethane sealant adhesive (RTV cure) is a very high quality product, minimum shrink and has a very high degree of flexibility it remains permanently elastic after cure, has very good adhesion to many substances and excellent resistance for use where vibration occurs.Weather proof and resists many chemicals.
Application: Ensure surfaces are clean before application, will seal and bond steel, aluminium, stainless steel, wood, concrete, plastics, fibreboard, fibreglass etc. used in engineering, auto, marine, electrical and construction industries. Can be overpainted when cured.
Temp: -30°C to +90°C
D206
Colour: Grey
QTY: 310ml
Description: DELTA Polyurethane sealant adhesive (RTV cure) is a very high quality product, minimum shrink and has a very high degree of flexibility it remains permanently elastic after cure, has very good adhesion to many substances and excellent resistance for use where vibration occurs. Weather proof and resists many chemicals.
Application: Ensure surfaces are clean before application, will seal and bond steel, aluminium, stainless steel, wood, concrete, plastics, fibreboard, fibreglass etc. used in engineering, auto, marine, electrical and construction industries. Can be overpainted when cured.
Temp: -30°C to +90°C
D207
Colour: White
QTY: 310ml
Description: DELTA Polyurethane sealant adhesive (RTV cure) is a very high quality product, minimum shrink and has a very high degree of flexibility it remains permanently elastic after cure, has very good adhesion to many substances and excellent resistance for use where vibration occurs. Weather proof and resists many chemicals.
Application: Ensure surfaces are clean before application, will seal and bond steel, aluminium, stainless steel, wood, concrete, plastics, fibreboard, fibreglass etc. used in engineering, auto, marine, electrical and construction industries. Can be overpainted when cured.
Temp: -30°C to +90°C
D208
Colour: Red
QTY: 85g
Description: DELTA Red gasket seal is a premium quality (RTV cure) sealant. To replace pre formed gaskets where high temperatures occur. Suitable for use on fuel systems.
Application: Ensure surfaces are clean, suitable for, engines, gaskets on flanges, pumps, motors, sealing on heating systems, used in engineering, marine and auto-mobileindustries.
Temp: -60°C to +300°C
D209
Colour: White
QTY: 290 ml
Description: D209 CLEAN ROOM SEALANT (FDA APPROVED)
AN MS polymer for use in food environments such as the following: Food processing, laboratories, hospitals, ice cream vans, bakeries, clean rooms, electronic assembly, refrigerated vehicles, food delivery vehicles etc. (overpaintable with water based paints) This sealant also acts as a physical barrier against micro organisms (IKI - report)Available in white only (FDA Approved (IANESCO - report)
Epoxy Resin Structural Adhesives
D300
Description: Rapid Cure Epoxy: Two Part Twin Syringe.
QTY: 28ml
Cure Time: 5 mins Colour when cured Amber
Basic Usage: General Purpose. Will Bond, Wood, Concrete, Tiles, Metals etc.
Application: Cut end off dispensing nozzles squeeze out required amount mix together untill even colour, apply to prepared surface, when finished seal end of nozzles with end cap provided.
D301
Description: Rapid Cure Epoxy: Two Part Twin Syringe.
QTY: 28ml
Cure Time: 10-15 mins Colour when cured Steel Grey
Basic Usage: Steel Epoxy Substitute. Will Bond and Repair Steel Castings, Broken Flanges, Valves, Key Ways and Cast Iron Components.
Application: Cut end off dispensing nozzles squeeze out required amount mix together until even colour, apply to prepared surface, when finished seal end of nozzles with end cap. Smooth down with damp cloth for smooth finish.
D303
Description: Quick Steel Epoxy: Two Part Paste. 2-1 Mix Ratio. Bulk Pack.
QTY: 500g
Cure Time: 4 hours Colour when cured Steel Grey
Basic Usage: Steel Epoxy Substitute. Will Bond and Repair Steel Castings, Broken Flanges, Valves, Key Ways and Cast Iron Components. For larger usage, slow cure.
Application: Use two parts base to one part activator, mix together until even colour then apply to prepared surface. Smooth down with water and spatula for smooth finish.
D304
Description: Steel Stick Epoxy: Two Part in Putty Form.
QTY: 125g
Cure Time: 30 mins Colour when cured Steel Grey
Basic Usage: Steel Epoxy Substitute. Will Bond and Repair Steel Castings, Broken Flanges, Valves, Key Ways and Cast Iron Components.
Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish.
D305
Description: Aqua Stick Epoxy: Two Part in Putty Form.
QTY: 125g
Cure Time: 45 mins Colour when cured White
Basic Usage: Aqua Stick will cure under water, Bonds and Repairs Fibreglass, Metals, Ceramics, Wood, Concrete, Pipes, Valves etc.
Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish.
D306
Description: Plastic Stick Epoxy: Two Part in Putty Form.
QTY: 125g
Cure Time: 2-3 hours Colour when cured White
Basic Usage: Plastic Stick Bonds to PVC, CPVC, ABS, Gutters, Drain Pipes, Automotive Repairs and Domestic Appliances. (Not suitable for Polyolefins)
Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish.
D307
Description: Copper Stick Epoxy: Two Part in Putty Form.
QTY: 125g
Cure Time: 30 mins Colour when cured Copper
Basic Usage: Copper Epoxy Stick used to repair Pipes, Elbows, Sink Taps, Water Heaters. Will seal freeze breaks in pipework.
Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish.
D308
Description: Wood Stick Epoxy: Two Part in Putty Form.
QTY: 125g
Cure Time: 45 mins Colour when cured Wood
Basic Usage: Moulds to repair or restore Wooden Objects, Carvings, Frames, Mouldings and fills holes. Furniture repair.
Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish.
D309
Description: Aluminium Epoxy Paste: Two Part Paste. 2-1 Mix Ratio. Bulk Pack.
QTY: 500g
Cure Time: 4-5 hours Colour when cured Aluminium
Basic Usage: Aluminium Epoxy Substitute will bond and repair Aluminium Castings, Aluminium Tanks, Pipework etc.
Application: Use two parts base to one part activator, mix together until even colour then apply to prepared surface. Smooth down with water and spatula for smooth finish.
D310
Description: Epoxy Cartridge Fast Cure
QTY: 50ml
Cure Time: 5 mins cure
Basic Usage: Two part, bonds glass, ceramics, metals, hard plastics and optical fibres.
Application: Easily dispensed with application gun and mixing nozzle ideal for assembly work.
D311
Description: Epoxy Cartridge Slow Cure
QTY: 50ml
Cure Time: 30 min cure
Basic Usage: Two part, bonds glass, ceramics, metals, hard plastics and optical fibres.
Application: Easily dispensed with application gun and mixing nozzle ideal for that larger area assembly work.
D312
Description: Application Gun
Basic Usage: For use with Epoxy Cartridge and Mixing Nozzle, enable product to be applied as mixture.
Application: Dispenses from cartridge through nozzle.
D313
Description: Replacement Nozzles
QTY: 1 packet = 10 nozzles
D314
Description: PLASTIC WELDER
QTY: 24ml Syringe
A toughened adhesive for use on most plastics, PVC, ABS, Acrylics, polyesters, vinyl esters and urethane. Plastic Welder has good resistance to outdoor weathering and cures in 5 to 10 min. Bonded materials can be handled in 20 to 30 mins. Ensure proper mixing to even colour - (Not suitable for P/E or P/P)
D370
Description: FUSION BOND
QTY: 50ml CARTRIDGE
A structural acrylic bonder for use on most materials. This versatile product creates a high impact bond on all metals, composites, ceramics, wood and glass. Fusion bond is ideal for bonding dissimilar materials and has a fast cure of 10 min. Applications include boats, fibreglass, automotive spoilers, vehicle roofs, ducting sheet metal applications, sports goods and aerospace. Fusion Bond has high resistance to fuels, lubricants and solvents and has good gap filling properties and high impact strength. Off white colour.
Supplementary Products
D400
Description: Turbo Superglue Tube
QTY: 3g
Basic Usage: Will bond most materials in seconds, pottery, steel, brass, leather, plastics, rubber and jewellery. A premium quality superglue.
Application: Remove cap and nozzle. Invert cap, puncture tube. Replace nozzle and cap. Apply adhesive to one surface, press firmly together.
D402
Description: Extra Superglue
QTY: 5g
Basic Usage: Will bond most materials in seconds, pottery, steel, brass, leather, plastics, rubber and jewellery. A general purpose superglue.
Application: Cut end of nozzle, ensure surfaces are clean and dry. Apply adhesive to one surface, press firmly together. Will bond in seconds.
D403
Description: Extra Superglue
QTY: 20g
Basic Usage: Will bond most materials in seconds, pottery, steel, brass, leather, plastics, rubber and jewellery. A general purpose superglue.
Application: Cut end of nozzle, ensure surfaces are clean and dry. Apply adhesive to one surface, press firmly together. Will bond in seconds.
D404
Description: Cyanoacrylate Activator
QTY: 200ml
Basic Usage: A specially formulated activator to reduce cure time of cyanoacrylate adhesives. Also for use on inactive surfaces.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN
D405
Description: Anaerobic Activator
QTY: 200ml
Basic Usage: A specially formulated activator to reduce cure time of anaerobic adhesives. Also for use on inactive surfaces.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN
D406
Description: Surface Preparation Cleaner
QTY: 400ml
Basic Usage: Use cleaner to prepare surfaces before application of all Delta adhesives and sealants.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN
D407
Description: Polypropylene (Cynoacrylate) Activator
QTY: 50ml (PUMP SPRAY)
Basic Usage: Use to activate surfaces on polypropylene substrates. Which are difficult to bond.
Application: Apply to surfaces being bonded. Allow to evaporate then apply adhesives to one surface.
D408
Description: Extra Superglue
QTY: 50g
Basic Usage: Will bond most materials in seconds, pottery, steel, brass, leather, plastics, rubber and jewellery. A general purpose superglue.
Application: Cut end of nozzle, ensure surfaces are clean and dry. Apply adhesive to one surface, press firmly together. Will bond in seconds.
D409
Description: Contact Adhesive
QTY: 500ml
Basic Usage: Rubber based adhesive, bonds, laminates, wood, plastics, leather, cork, rubber, stone, metals, fabrics.
Application: INSTRUCTIONS ON CONTAINER
D411
Description: Spray Adhesives
QTY: 500ml
Basic Usage: As Contact Adhesives in spray form.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN
D500
Description: "O" Ring Splicing Kit, Metric and Imperial Sizes
QTY: 1 kit
Basic Usage: Enables on site making up of "O" rings,
covering sizes of 1.6mm - 8.4mm
1/16 inch to 1/4 inch nitrile cord.
Application: Select size of cord required, insert in "V" block, cut to length. Apply cyanoacrylate to one surface, press firmly together, will bond in seconds.
D501
Description: Copper Anti-Seize Compound
QTY: 5g
Basic Usage: Protects metal parts against rust, corrosion, heat, salt water, alkalis and acids. Prevents seizure of threaded parts, forms protective coating that will not wash off. Prevents disc brake squeal.
Do not apply to friction material
Application: Ensure surfaces are clean for ease of application. Apply to threaded parts, gaskets, spark plugs etc. and high temperature applications. Ideal for brush application.
D502
Description: Copper Anti-Seize Compound
QTY: 500g
Basic Usage: Protects metal parts against rust, corrosion, heat, salt water, alkalis and acids. Prevents seizure of threaded parts, forms protective coating that will not wash off. Prevents disc brake squeal.
Do not apply to friction material
Application: Ensure surfaces are clean for ease of application. Apply to threaded parts, gaskets, spark plugs etc. and high temperature applications. Ideal for brush application.
D503
Description: Copper Anti-Seize Compound
QTY: 3kg
Basic Usage: Protects metal parts against rust, corrosion, heat, salt water, alkalis and acids. Prevents seizure of threaded parts, forms protective coating that will not wash off. Prevents disc brake squeal.
Do not apply to friction material
Application: Ensure surfaces are clean for ease of application. Apply to threaded parts, gaskets, spark plugs etc. and high temperature applications. Ideal for brush application.
D504
Description: Copper Anti-Seize Spray
QTY: 400ml
Basic Usage: As 501, 502, 503, in aerosol spray form
Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN
D505
Description: Air/Gas Leak Detector Spray
QTY: 200ml
Basic Usage: Use to detect leaks in air/gas systems,which operate under pressure.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN
D506
Description: Air Brake - Pipe Sealant ( Anaerobic) Concertina
QTY: 75ml
Basic Usage: To seal metal threaded parts on air brakes and pipe connections. New design concertina Applicator.
Application: Apply to one surface, ensure joint is filled completely with sealant. Assemble and allow to cure.
D510
Description: MULTI GASKET (ANAEROBIC) CONCERTINA
QTY: 75ml
High performance multigasket in a unique concertina complete with shroud for easy dispensing. Multigasket has good solvent resistance and applications include engine casings, gearboxes, differentials and flanges. Orange colour.
D511
Description: FOOD SAFE LUBE (AEROSOL)
QTY: 400ml
A Highly effective lubricant designed to meet the stringent requirements of food environments. Used to lubricate conveyors, mixers, wrappers, packaging machinery, filling machines and all food processing equipment used in bakeries, dairies, canneries, meat and fish processing. This product is odour and taste free, it is a colourless long life lubricant which is non-toxic and non flammable.
D512
Description: MITRE BONDER
QTY: 50gm//200ml KIT
Mitre Bonder kit is a fast acting two part adhesive that has replaced traditional fixings and provides a strong clean bond in seconds on many materials. Ideal for the manufacture of furniture, typical applications include bedrooms, kitchens, shop installations, cornice, MDF profiles, picture framing and general woodworking. Mitre Bonder is suitable for bonding MDF, wood, rubber, PVC, metal and some plastics.Simply spray one surface with the activator and allow to evaporate, apply adhesive to other surface, push both surfaces together and place in position then hold for 10 seconds, simple as that. Translucent bond.
Double Sided Adhesive Tape
DST 100
Size: 12mm x 10MTR
Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration and weather resistance.
Uses: Automotive mouldings, decals, emblems and mirror fixings.
DST 101
Size: 19mm x 10MTR
Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration and weather resistance.
Uses: Automotive mouldings, decals, emblems and mirror fixings.
DST 102
Size: 25mm x 10MTR
Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration and weather resistance.
Uses: Automotive mouldings, decals, emblems and mirror fixings.
DST 103
Size: 50mm x 10MTR
Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration and weather resistance.
Uses: Automotive mouldings, decals, emblems and mirror fixings.
Gaffer Tape - Rubber Adhesive
DT 200
Size: 50mm x 50MTR
Colour: Silver
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
DT 201
Size: 50mm x 50MTR
Colour: Black
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
DT 202
Size: 50mm x 50MTR
Colour: White
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
DT 203
Size: 50mm x 50MTR
Colour: Red
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
DT 204
Size: 50mm x 50MTR
Colour: Green
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
DT 205
Size: 50mm x 50MTR
Colour: Blue
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
DT 206
Size: 50mm x 50MTR
Colour: Yellow
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
DT 210
ALUMINIUM FOIL TAPE
Size: 50mm x 25 MTR x 50 Micron
A durable self-adhesive high tack tape with good peel and excellent tensile strength. This tape can be used on a wide range of materials for industry. Applications include metal, aluminium, plastics, fibreglass,and wood. It can also be used on ducting, insulation and lagging and will operate as a heat shield to 160°C.
Service temperature: 30°C - 160°C
Position & Mounting Tape
DST 301
Size: 19mm x 50MTR
Positioning and Mounting Tape
Uses: Positioning before welding and drilling also on vehicle interiors.
Max Temp: 60°C
DST 302
STINGER TAPE 25MM X 25MTR ROLL
Uses: This versatile high tack, high temperature, permanent tape is an excellent all round performance product. Stinger Tape can be used on a multitude of materials such as glass, powder coating processes, mirror backing, metals, aluminium, carbon fibre, plastics and even the wife's lips! Replacing traditional fixing methods, it's easier to apply and gives uniform bonding with even stress distribution.
Temp Range: 200°C
DST 303
HIGH TACK RESIN BONDING STRIP 25MM X 5MTR X 2MM
Uses: Resin tape is a high strength, very high tack bonding strip. With it's unique non hardening toffee-like appearance it remains flexible. It can be used on many applications such as vehicle and boat building, repairs to caravans, manufacturing, shopfittings and carpet fixing. Resin Tape is suitable for use on wood, plastics, metals aluminium and carbon fibre and forms a solvent free waterproof bond.
Service Temperature: 0°C - 40°C
DST 400
Size: 39mm x 26mm (Pack of 40)
High density P.E. foam - Black 100 grm/m³ Green Liner.
Uses: Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration Resistance.
Max Temp: 60°C
DST 401
Size: 80mm x 25mm (Pack of 60)
High density P.E. foam - White.
Uses: Very high shear, moisture stable, good resistance to ultra violet light, solvents, oil, grease. High tack.
Max Temp: 95°C
APPLYING DELTA PRODUCTS SUCCESSFULLY - Surface preparation - best results will be obtained by cleaning with D406 surface preparation cleaner. Note: Some surfaces may be affected by solvents (ie plastics). Test small area before use. A slightly roughened surface will ensure good bonding.
CHOOSING AN ADHESIVE - Select adhesive to suit application, - does it need to be permanent or dismantled, what materials are being bonded, is there a gap filling requirement? If in doubt call our technical helpline.
HEALTH & SAFETY - Care should be taken when handling adhesives, ensure adequate ventilation, wear gloves and eye protection. Cyanoacrylate adhesives will bond skin in seconds.
KEEP OUT OF REACH OF CHILDREN.
STORAGE: Store containers in a cool dark place.
